What gutter installation costs in San Antonio

Start with the house, not the foot

Per-foot gutter prices hide what actually decides your total in San Antonio: which of three common house types you own.

The 1950s–80s ranch with no gutters. Northwest of downtown, in Leon Valley, and along the older streets of Converse and Universal City, builders on caliche lots skipped gutters altogether. These homes rarely need a full wrap. Front elevation, garage side and the patio slab are usually the runs that matter, 70–110 feet, and the job is typically $700–$1,400. Whole-house on a single-story ranch, 140–170 feet, is $1,400–$2,200. First-time installation explains which walls get them.

The 1995–2015 two-story in Stone Oak, Cibolo or Schertz. Built with 5-inch .027 aluminum on spikes that have been backing out of the fascia for a decade. Replacement is 190–240 feet with six to eight downspouts, usually quoted in 6-inch with 3x4 downspouts because the roofs are big and steep: $2,400–$3,400, tear-off included. That's the typical gutter replacement price for these homes.

The Hill Country hip-roof custom in Boerne, Helotes or Fair Oaks Ranch. One story but sprawling, 240–320 feet, ten or more inside corners, often a standing-seam or tile roof. Every corner is a hand-mitered joint and the metal roof needs a different hanger, so these run $3,000–$4,800 even without copper.

• Ranch, the sides that matter$700–$1,400
• Ranch, whole house$1,400–$2,200
• Two-story replacement$2,400–$3,400
• Hill Country hip roof$3,000–$4,800

Typical ranges, not a quote.

Per-foot rates for seamless aluminum

Those rates typically include forming the coil in your driveway, hidden hangers on 24-inch centers, all miters and outlets, downspouts to grade, and hauling away whatever was there before. The first and second rows differ by a dollar or two a foot, which buys thicker metal and downspouts with twice the capacity. A spring thunderstorm here can drop an inch in twenty minutes, so the first row is rarely the better buy. The installation guide covers how a system should be sized to your roof area.

Repair prices

• Reseal a corner, end cap or outlet$150–$250
• Re-hang a sagging run (20 ft)$150–$300
• Replace or upsize a downspout$120–$220
• Add a downspout mid-run$180–$300
• Swap a hail-flattened section$200–$450

Typical ranges, not a quote.

Most repair visits bundle two or three of these into a $300–$600 morning. After an April hail storm, be wary of anyone whose prices jump; ask for the same line items you'd get in October, and a written scope you can hand your adjuster. The gutter repair page describes each job.

Guards and cleaning

Guards in San Antonio have one enemy that most cities don't: live oak catkins, which fall in April as a fine tangle that slips through cheap screen. Aluminum screen is $5–$9 per foot, stainless micro-mesh $10–$18, reverse-curve $18–$30. A 150-foot house lands between $800 and $2,700. See gutter guards for which type handles which tree.

Cleaning is usually priced by the house: $120–$200 single-story, $180–$300 two-story. Details on the gutter cleaning page.

Seven things that change the cost of gutters

1. Corners. A gable-roof ranch might have four; a Hill Country hip roof can have fourteen. Each is a miter.
2. Roof material. Standing-seam metal and clay or concrete tile need specialty hangers and take about a third longer.
3. Second story. Adds 15–25% for staging and safety.
4. Fascia. The soft spots hide behind the old gutter. Ask the contractor to probe it before quoting so it's on the estimate, not a surprise.
5. Six-inch versus five. About 20% more, worth it on any roof over 2,500 square feet or with a steep pitch.
6. Access. Pool decks, agave and yucca beds, rock landscaping, and acreage driveways in Boerne and Helotes all slow a crew.
7. Color. White, brown, clay and the common trim colors are usually in stock. An unusual color can mean ordering coil and waiting a week.

How to read a gutter estimate

Start at the bottom line, then ignore it until you've read the rest. A useful estimate lists footage for each size of gutter, the gauge, the hanger type and spacing, each downspout and its size, extensions, fascia per foot, guards per foot if any, and haul-away. Check the footage against a rough measure of your own eaves; a tape along the ground under each roof edge gets you close. If two estimates differ by more than a few hundred dollars, the reason is almost always in those lines.

Ways to spend less without buying less

• Cover only the sides that need it on a house that has never had gutters.
• Book repairs and fascia work in the dry months, when schedules are easier.
• Keep sound gutters and upgrade the downspouts to 3x4 instead of replacing whole runs.
• Do the extensions and splash blocks yourself if you're comfortable; they're the simplest part of the job.
• Skip guards under small ornamental trees.

The places not to save are the gauge, the hangers and the downspout size, because those are what the cheap system you're replacing got wrong.

Questions to ask about price

1. Is this a price per foot or a total, and what does it include?
2. Is haul-away of the old gutters included?
3. How is rotten fascia priced if it turns up?
4. Is there a trip charge or a minimum?
5. How long does this price hold?
6. Is a deposit required, and when is the balance due?

What a low quote leaves out

Ask three contractors for a gutter estimate San Antonio homeowners often see a $700 spread on the same house. The low number is almost always .027 metal, 2x3 downspouts, spike-and-ferrule hangers, and no tear-off. Get the gauge, the hanger type and spacing, the downspout size, and whether fascia and haul-away are included in writing. What the price per foot actually buys goes line by line, and repair vs. replacement covers the point where patching a 20-year-old system stops making sense. Costs by house size are in gutter costs by home size.

A written estimate should be free; ask how long the price holds.